Home Quadcopter Diy Where to start with the quadcopter frame dimensions for building your quadcopter

Where to start with the quadcopter frame dimensions for building your quadcopter

2 min read

If you want to make a quadcopter by yourself but do not know where to start with the quadcopter frame dimensions,here will share with you about quadcopter frame knowledge,hope will help you.

Where to start with the quadcopter frame dimensions

Quadcopter frame dimensions are measured on the motor to motor distance, not the center to motor distance.where to start with the quadcopter?before answering this question you have to make sure that what’s types of quadcopter you want to make,Some of them are Monocopter, Twincopter, Tricopter, Quadcopter, Y-6, Hexacopter, X-8,Octocopter. and then you buy some Aluminium box tube and a couple of sheets of plate to start building.

What frame dimensions are popular?

There is no thumb rule for size of the frame but for popular size quadcopter is from 250mm to 550mm.You can diy it or buy one from big Retail network or click here Best quadcopter stores

Which parameters are looked at?

Before choose a frame,we have mostly focused on a lot of parameters including frame weight,diagonal wheelbase,takeoff weight and some are recommended  components required such as propeller,battery,motor,esc etc.

quadcopter frame dimensions

For example:

F330 Glass Fiber Mini Quadcopter Frame 330mm


Width: 330mm

Height: 48mm

Weight: 147g (w/out electronics)

Motor Mount Bolt Holes: 16/19mm


4 x 28mm 1000~1200kv (or similar size/kv)

4 x 12~20 Amp ESC

4 x 7×5~8×4 Prop (2CW & 2CCW)

1 x HobbyKing Multi-Rotor Control Board

1 x 1000~1800mAh 3s 11.1v Lipoly battery

Load More Related Articles
Load More In Quadcopter Diy

Leave a Reply

Your email address will not be published. Required fields are marked *

9 + two =