Do you looking for best esc for quadcopter that can be easily programmed for a fpv racer? We no need to explain what’s ESC, if you want to know more about quadcopter, you can focuses on our website Quadcopter ESC Archive. Here are just recommended some best ESC for your fpv racing quadcopter. In this lists we have the ESC current rating, price, input voltage, weight and Features. Hope that It can give you what you want in here.
|Hobbypower A2212 1000kv Brushless Motor + 30a ESC for Multicopter 450 X525 Quadcopter
BEC: 1A / 5V (Linear mode)
Specially for Multi-copter, throttle respond fast; Suit for throttle, which can compatible well with motor;
Throttle signal is twisted pair cable, reduce the crosstalk while the signal transfer by the copper wire and flight more stable;
The maximum refresh frequency up to 500Hz throttle signal, compatible with all flight controls;
Minaturization design, 30A with high performance capacitor fliter on the board, weight reduce to 25g, also already thicken the PCB copper specially and low heat for small aircraft.
I’ve ordered 12 of them, been using them in small racing quads and big Tarot Hexacopter, great value, amazing performance and reaction time!! Flying flawlesly with EMAX Skyline32 Naze32 and CC3D Open Pilot. Verry excided, definitely will buy more for future builds!!:) Thank you for this great product!
|Emax Simonk Series 12A 20A 25A 30A 40A ESC For Quadcopter QAV250
Current: 12A 20A 25A 30A 40A available
A great sturdy and trustworthy ESC for the price. Have had no issues with them at all. The ESC is quite big for a 250 sized quad if that’s what you’re intending to use these for. I was able to fit these on the arms of the quad without issue though. Would recommend.
I have a lot of these. They are my go-to esc for smaller motors. I have Emax 1806s and 2206s running on these, and they work flawlessly.
|FVT LittleBee 20A ESC BLHeli OPTO 2-4S Supports OneShot125 For RC Multirotors
Input Voltage: 2-4S Lipo
BEC Output: No
Continue Current: 20A,Burst Current:25A up to 10S
Weight: 6g(include Wire)
Support Damped mode
Main IC: SILABS
MOS: ALL N FET,AOS COMPAN
Nothing more to say. this are now some of the best esc for multirotor! Great value, low price, great performance!
Nice small esc, use it with my qav250, working very good, flashed with latest blheli through naze32 without any problems.
I bought it for my 250mm quadcopter with Sunnysky X2204 motors. Very good quality and you can flash it with BLHELI over the signal connector.
|Makerfire 4pcs 25A ESC 2-6S BLHeli Brushless Speed Controller
Continuous Current: 25A
Safe power function: regardless of the throttle stick in any position the motor will not start immediately.
Throttle Calibration function: Adapt to different remote throttle travel difference, improve throttle response linearity, with a smooth, delicate feel and excellent speed linear speed.
Low Voltage Protection Mode , Low-voltage protection threshold.
Seemed a bit goofy on my tricopter, throttle didn’t seem very smooth. So I moved them over to my quadcopter and they work great. For the price. perfect.
This ESC is with mini radiator,low operating temperature with high response speed.The gas is stable with higher reliability.Support OneShot ultra-high speed control，Bi-directional rotating.
Bought 4 set of these and my parcel arrived sooner than I expected. Nicely packed, Fast Shipping, Accurate Description, Will buy more soon. I’m used to use them successfully for more then two years.
|HOBBYMATE BLHeli-15A-ESC-Speed-Controller for 180-210-250 Racing-RC-Quadcopter Multicopter
Input: 2-4s Lipo
Constant: 15 Amps
Burst: 25 Amps
Weight: 4g bare board
Motor wire: 70mm
Signal wire: 120mm
PCB – 4 Layer Blind hole PCB – 3oz Pour
OneShot and BLHeli 16.2 Pre Installed
HOBBYMATE 15A ESCs have all the performance you would hope for and you will struggle to find a frame small enough to fit these ESCs and they will still give you plenty of headroom on a standard 180 210 250 size quad!
Oneshot125 is a different and faster communication protocol between the flight controller and the ESC on your quadcopter.
It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.
Damped mode: This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
Strongly recommended who run heavy frame and big size motor. Because there is no sync problem for pancake style motor. It has Blheli firmware. Smooth and fast reaction for throttle. I like it!!!
I received in good condition. Nice quality and finish. For me Wing its perfect.
ESC seems good quality, I haven’t tried yet on my quad. It would be good if there was a user manual. Thank you anyway.