With the development, who want to open new market by introducing quadcopter, But Comparing diy quadcopter vs DJI phantom which is the best option for you? Where getting stuck is working out if it is better to buy a ready to fly quadcopter such as the DJI Phantom or try to diy one quadcopter myself. Let’s discuss this topic, below.
As we know, DJI is very famous drone brand on market today, and DJI phantom from 1 to 4 are professional for aerial photograph.
DJI appear to be understanding more and more the features that are desired by and appeal to the more mainstream drone user–above all, the ability to capture professional quality aerial video and photos.
Each manufacturer has done their best job yet in incorporating those features into their latest drones.
So if you need a quadcopter, the frist caught your attention maybe is DJI, Now I will analyze DJI phantom then diy quadcopter, keep on.
DJI phantom has the merits below
#1 DJI phantom Easy and quick
Offer outstanding specs and promise to provide great flying experiences for beginner pilots and experienced flyers alike. Honestly a phantom is almost certainly an OK option.
You might also look at the 3D Robotics RTF/ARF options which are much more extensible and possibly more reliable, and which can be gotten in the air almost as fast.
Maybe this reason is that why so many people would like to buy a DJI phantom not choose diy quadcopter.
#2 DJI phantom maybe cheaper for Price
Diy quadcopter vs DJI phantom is quite a price difference. DJI phantom price is $1000 or more and Diy quadcopter is a range from a few hundred dollars to over thousand, except more weight / good quality on your quadcopter and a higher price tag.
Maybe DJI phantom is relatively cheaper for beginners, who often make drone crash when they practice. Diy quadcopter price depends on how much you can afford to spend on replacement parts when you crash.
#3 DJI phantom maybe more flight time
DJI phantom 4 can fly 28 Mins is asserted on the Official website. But somebody not sure about phantom quadcopter flight times with a gopro and gimbal, but I know that one of the reasons for the generally better flight times that the phantom has is because many diy builders don’t think too much about the weight of their build.
If you are just a bit weight conscious you can squeeze plenty of flight time out of a diy quadcopter.
#4 DJI phantom GPS attitude mode
GPS attitude mode is an autopilot system that keeps the Quadcopter stable and right-side-up when moving, and holds it in a fixed horizontal and vertical position whenever you release the controls. Most users, especially videographers hoping to get the smoothest possible shoots, will opt for GPS attitude mode.
This is ideal for shooting video because you can compensate for light or moderate wind that might otherwise cause the aircraft to drift.
But DIY quacopter also is a good choice, beacuse as below
#1 DIY quacopter Learned so, so so much.
You dont know anything about electronics, so not too excited about DIY quacopter.
But you have to also realise that building one may teach me how to maintain more sophisticated aircraft down the track. As for the learning curve you could not be more right.
There is a lot to learn to be able to get into multirotors and the like from my experience so far. when you crash, you’re going to have to learn how to fix your copter anyway, so you might as well save your money and build it yourself – and gain the skills you’ll need from the start.
#2 DIY quacopter it is half the fun. Tweaking, diagnosing, improving, etc.
I suggest building your own machine with the Pixhawk as the brain. It will take a lot of reading and learning, but much work has been done on the wiki to make it user friendly and you will feel much more confident in the air with a machine you know inside and out!
That learning curve comes anyway with a RTF quad and I don’t think many are prepared for that.
#3 Maybe DIY quacopter cheaper? Hard to tell
Possibly more expensive in the end, but in different ways.
A phantom might cost $1000 up front, and that’s what you get. Mine started at about $400, but then I added FPV goggles, and replaced the motors with bigger ones, and replaced the flight controller with a more advanced one, etc.
The cost starts low but rolls. Of course, you end up with ‘spare parts’ which may eventually be enough to build another! Depends on how much you can afford to spend on replacement parts.
#4 DIY quacopter can build something nice on your own
You went the DIY route, with the goal of building something to support FPV video, and ideally eventually a gimbaled camera. Also would like to have altitude/position hold. Basically building something with the features of a phantom, from scratch. That mean that you can build more nice and more functional requirements on your own.
Update PS: Some of points are collected from forums and reddit.
Conclusion for diy quadcopter vs DJI phantom
Diy quadcopter you have to make sure that have enough time to do thorough research and planning, especially for the beginners. It would be pretty tough timing to get something filming ready in two weeks unless you are planning on buying RTF such as DJI phantom and paying a lot for shipping potentially.
If you are a beginner, best RTF and Micro quadcopter buying guide for beginners ( It’s worth seeing). If you are a builder, suggest you diy one quadcopter by yourself, build what you want.
Diy quadcopter parts list - fpv racing quadcopter tutorial
August 30, 2016 at 5:03 pm
[…] After this, you maybe consider one question is that Buy vs build your best first quadcopter? or diy quadcopter vs DJI phantom which is the best option? If you have know that what’s your need, and plan to diy one, please […]