Home FPV quadcopter build guide and fpv flying tips Most popular quadcopter flight controller for FPV Racing RC Multirotors

Most popular quadcopter flight controller for FPV Racing RC Multirotors

12 min read
0
0
flight controller for fpv

Please check out latest Best Drone Flight Controllers 2017

As FPV Racing become more popular, the market for parts and mechanics will expand, bringing costs down. If you are looking for flight controller for fpv, But many factories has pushed more and more brands, and you do not know which flight controller for fpv is best? Here will tell you most popular quadcopter flight controller for FPV Racing RC Multirotors.

If you want to get more informations about how to choose the best quadcopter flight controller for aerial photography or with altitude hold, You could check this area Quadcopter Flight Controller

The most popular quadcopter flight controller for FPV Racing RC Multirotors as below.

Naze32 10DOF Flight Controller

Rush price under 27.99 (USD)

Mini Naze32  10DOF Flight Controller For FPV RC Multirotors

Designed for use with small indoor or small to mid-sized outdoor multirotor crafts, or as a standalone camera stabilizer. The Naze32 flight controller is extremely simple to setup, with configuration based on the familiar “MultiWii” software.

Features:
Battery voltage monitoring
Built-in FrSky telemetry converter
Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
Onboard USB for setup and configuration
Extra bright LEDs
Modern GUI for all operating systems, Baseflight Configurator or Cleanfligh Configurator

Click Here to Check Current Price

Reviews from pilots:

  • The quality is very good, both the connectors and the pcb itself. Already connected it to my computer and both the ftdi and naze32 fully work with baseflight. I already pre-configured it but did not fly it yet as I am building the drone.
  • This is a great little unit and I have everything working with Cleanflight fine including PPM connection, a U-Blox GPS unit and a MicroMinim OSD running MWOSD.I would highly recommend this unit.
  • This board is great for micro and mini drones. It comes with Cleanflight preinstalled. In 5 minutes I configured the software and in 15 I moved the connections from a Flip32 to this one. Very straight forward. Gyro, accelerometer, baro and buzzer were working fine.
CC3D Atom CC3D EVO Flight Controller

Rush price under 13.31 (USD)

CC3D EVO Flight Controller STM32 32-bit 

For RC Helicopter QAV250 Quadcopter frame
The CC3D EVO provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes.

  • Upgraded version OpenPilot CC3D EVO Flight Controller STM32 QAV250 Quadcopter
  • Consumer Electronics
  • Gadgets & Other Electronics
  • Other Gadgets

Click Here to Check Current Price

CC3D EVO CopterControl Hardware FeaturesWIth a function of being directly plugged into the satellite receiver (It needn’t conversion cable) Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.

Software support for Windows, Mac and Linux.Direct high speed USB support with no drivers required, a truly plug and play device. Spektrum satellite receiver support.Futaba S-BUS hardware support.Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage.

Flexiport CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.

Superior user experience OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver.

Reviews from pilots:

  • For this price, it is crazy that it can work perfectly, but it does!
  • Very good kit: controller + anti-vibrating platform + antenna holder. Perfect for users of FS-iA6 receiver. Firmware can be upgraded smoothly by means of Libre Pilot.
  • WHat can I say. i love CC3D. They are not expensive and work well. Very easy to set up with the Open Pilot software. I am Happy. This will go in a flying wing and I have plent y of space under the hood. If you want smaller footprint, i recommend the CC3D Atom.
Upgrade NAZE32 SP Racing F3 Flight Control Acro 6 DOF/Deluxe 10 DOF for Multicopter

Rush price under 37.95 (USD)+ Free shipping

Upgrade NAZE32 SP Racing F3 Flight Control Acro 6 DOF/Deluxe 10 DOF for Multicopter

Better coding practices and introducing tests, easier to maintain and for future development.
Many bugs fixed from Baseflight.
Supports more flight controllers, including CC3D, CJMCU and Sparky.
Supports OneShot ESC and more than 8 RC channels.
Additional PID controllers that uses floating point arithmetic operations. (now has 3 built-in PID Controllers)
Many more features such as RGB LED strip support, Autotune, In-flight PID tuning with your radio, blackbox flight data logging etc.


Click Here to Check Current Price

Reviews from pilots:

  • Received the order quick, board was perfectly packed. After installation work perfectly. VERY good value for money!
  • Again, great product. This is the second time I’ve bought this FC. No problems. Enough ports. I’m using it in PWM mode this time. Also works perfectly fine!
  • This is the best FC on the market until now with very good quality and performance. I flashed it with latest Betaflight firmware and go fly whithout any issue. Nice work.
Openpilot MINI CC3D Combo Atom NANO CC3D Flight Control for FPV QAV

Rush price under 17.97 (USD)

Openpilot MINI CC3D Combo Atom NANO CC3D Flight Control for FPV QAV 250 FPV

  • Bent Pin mini CC3D flight controller.
  • OpenPilot CC3D Atom board with high quality, protective case
  • 4Mbits on-board EEPROM for configuration storage.
  • This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality.

Click Here to Check Current Price

Reviews from pilots:

  • Good value for this FC, works as advertised and work great with betaflight and cleanflight.
  • Delivery was on time without delay; the corresponding description; satisfied with a quality.
  • Excellent value and quality. Very fast shipping and great packaging. Smooth transaction and good customer service. Some of the reasons I keep doing business with Banggood.
Mini Ublox 7M GPS Module for CC3D Naze32 Flip32 SP F3 Flight Controller

Rush price under 26.76 (USD)+ Free shipping

Mini Ublox 7M GPS Module for CC3D Naze32 Flip32 SP F3 Flight Controller

This Mini 7M GPS use UBlox 7M chips, new cool shell, mini size, diameter is only 45mm, suitable for small FPV across Quadcopter For CC3D and SP Racing F3

  • use UBlox 7M chips
  • new cool shell
  • mini size
  • diameter is only 45mm
  • suitable for small FPV across Quadcopter For Naze32 Flip32

Click Here to Check Current Price

Reviews from pilots:

  • This is a complete set of GPS with included folding mount which is very easy to use.
  • Very good device cheap and good at the same time! Would buy again.
  • The manual is very well explained and for any aditional question internet has a lot of tutorials and videos. Flight performence is very good and overal build quallity is good.


Load More Related Articles
Load More By Jack
Load More In FPV quadcopter build guide and fpv flying tips

Leave a Reply

Your email address will not be published. Required fields are marked *