If you decide to make a fpv quadcopter, custom quadcopter frame is one way but For most people, purchasing existing quadcopter frame from online shop. Here are some great quality frames are recommended by good pilots.
Below fpv quadcopter using these best quadcopter frame parts:ZMR250, ZMR 2.4, ORANGE PAIN, BLUE MAMBA, ZMR250 UHF, BABY’S FIRST ZMR, PEGASUS, SKRILL (RCX250), ZMR “BULLET”, KIRUHA FPV, TYCHO CELCHU (ZMR250), BASH MINI V2, VF-1 VALKYRIE, KIRUHAFPV etc.
Rush price under $45.72 (USD)+ Free shipping
|H250 ZMR250 250mm Carbon Fiber Mini Quadcopter Multicopter Frame Kit
This is my first newbie 250mm quad frame. Easy to assemble, lightweight and very sturdy. I’m very happy with the quality of this frame. The frame I revived is full carbon fiber. No laminated parts.
This is a good quality frame, and the assembly is easy. Together with this frame I used a Diatone power distribution board v2.1 (sold by banggood), and it fits very well. I had to slightly enlarge the mounting holes to install some SunnySky 2204 motors, but it was pretty simple.
Rush price under $149.99 (USD)+ Free shipping
|EMAX Nighthawk 250 Carbon Fiber Frame Combo CC3D MT2204 Motor 12A ESC
Material: pure carbon fiber frame (blue, green and red theree color: Random delivery)
Arm plate thickness: 3mm
Weight: 129g (±5g)
With rubber damper to decrease vibration during flight.
Aluminum alloy spacer, light weight, reliable.
I am really impressed with this quadcopter. I went for this one over the Nighthawk Pro as I like building things and wanted to be sure I would know how to fix it when the inevitable happens.
The carbon fiber frame has been machined very precisely and all holes lined up perfectly. What’s neat about this frame is that it can be configured to be either 250 size or 280 size depending on what holes are used when mounting the arms, this was a little unclear on the web page so came as a nice surprise.
I also purchased a power distribution board which made for a tidy build. I haven’t had any bad crashes yet but the build feels strong and spare arms are available if needed.
Overall, very impressed! Please note, the camera, lipo and plastic props in the pic were ordered separately!
This is a great starter racing quad. High quality components, including carbon fiber props.
But in addition to a transmitter and receiver, you will need:
– Battery cable with XT60 connector
– Power Distribution Board (not required but highly recommended)
– Spare props (6030), suggest some plastic ones to learn on There are minimal instructions, you will need to Google around.
There are several how-to builds on YouTube. Use the QAV250 profile in OpenPilot for performance settings. Good luck!
Rush price under $22.99 (USD)
|Diatone FPV Quadcopter Frame Kit
Very good quality. Robust. Easy to assebly. Looks like TBS Discovery. Very good price. Arms interchangeable with DJI. But arms are very stiff. Good
Bought this, put my ex-naza M lite F450 setup on it. Naze32 acro board, PPM rx. 200mW vTX, runcam fpv cam. 1038 DJI props. Been flying it for a couple of months, strapped a 5A 4s on it, no problem. Even with the Yi on top, lots of power, flips and rolls just like a racer. Now overthinking longer arms/ bigger motors, and 6S 5A (*2x3S) for longer flight times. …And an EDF… Strapping a jet engine to a sheep. Humankind has come a far way.
Rush price under $24.99 (USD)
|Lisam LS-210 210mm Carbon Fiber Frame Kit
Material: Carbon Fiber
In high strength test, flying fluently in cornering, is suitable for the competition
Good strong frame that can take a hit, look forward to flying it when i can!! I use this frame for freestyle. She is realy strong : when i crash, she doesn’t break.
Several past reviews have pointed out two suspected weak points, namely the large center cutout and the large cutouts near the rear standoff holes. Fortunately, Banggood/Lisam have addressed the complaints and made the cutouts much smaller. There is now approximately 1cm of carbon fiber to either side of the center cutout, and the previously excessively large rear cutouts have been made smaller than the standoff holes. With these issues addressed, the frame is now a great, durable alternative to the overpriced QAV210.
Rush price under $14.9 (USD)
|ZMR250 H250 250mm Fiberglass Mini Quadcopter Multicopter Frame Kit
It’s a cheap frame and that’s exactly what you receive. it seems to work fine but it’s at best mediocre quality.
Good quality frame, I put DYS1806 2300kv motors on which didn’t line up correctly so i had to bore out 2 of the holes on each arm to make them fit. All in all i’m happy with the frame.